Cutting Automation

Title:
Cutting Automation
Magicut Series

Magicut is the high competitive CNC metal plate cutting machine in its class. It’s easy to install, simple to operate, and with high efficient downdraft table.

Features

• Small foot print: easy to install / easy to relocate
• New design is rigid and compact
• Travel Rail: X/Y axis have high precision linear guide ways with double preloaded guide bearings
• Drive Unit: X/Y axis driven by precision rack (CP8) with pinion drive
• Drive Motor: High efficiency AC servo motor with low inertia, high torque and high resolution
• Low backlash worm reducer with backlash < 3 arc minute
• Cutting Range: Plasma cutting-air plasma * 1 / Flame cutting-under 100mm gas
• Effective cutting width: 4', 5' or 6'
• Effective cutting length: 8' to 10'
• Maximum travel speed: 350 IPM
• Cutting speed: 230 IPM

Brochure

Manual

Spec Sheet

Drawing

Catalog

ModelUnitMagicut 12Magicut 15Magicut 18
POWER INPUT-3 Phase 220V 50/60Hz3 Phase 220V 50/60Hz3 Phase 220V 50/60Hz
MAX. CUTTING WIDTH (A)in51.262.974.8
MAX. CUTTING LENGTHft98.4 (+98.4)122.0 (+122.0)122.0 (+122.0)
MAX. WORKPIECE THICKNESSin / min444
MAX. TRAVEL SPEEDin / min354.3354.3354.3
CUTTING SPEEDin236.2236.2236.2
MOTOR DRIVEN UNITinAC servo motorAC servo motorAC servo motor
LONGITUDINAL DRIVEinRack & pinionRack & pinionRack & pinion
CROSS DIRECTION DRIVEinRack & pinionRack & pinionRack & pinion
LONGITUDINAL RAIL
 		inLinear wayLinear wayLinear way
CROSS DIRECTION RAILinDouble linear wayDouble linear wayDouble linear way
NUMBER OF TORCHin1 plasma + flame (option)1 plasma + flame (option)1 plasma + flame (option)
CNC CONTROL UNITinEDGE IIEDGE IIEDGE II
OVERALL RAIL LENGTHin134.6158.3158.3
RAIL GAUGE (B)in61.473.285
MAX. STROKE ON CROSS AXISin51.26374.8
OVERALL WIDTH (C)in79.591.3103.1
OVERALL HEIGHT (D)in59.159.159.1
OVERALL LENGTHft137.8161.4161.4
PARKING SPACEin31.531.531.5
WEIGHTlb187023102464

 

EDGE II CNC controller manufactured in accordance with GENTEC specifications. -in effect at the time of manufacture (Feb 1, 2006 shown below)

• Advanced PC-based CNC controller
• Intel 2.4GHz processor
• 256MB of RAM
• 40GB hard disk
• 10.4" VGA active matrix color LCD screen
• 1.44MB floppy drive
• Windows XP operating system
• Optional HyperNest software

 

• PC-004 Zinc powder marking torch
• PC-005 Zinc powder for marking
• PC-007 Laser point positioning unit
• PC-047 Anti-collision device
• PC-102 Downdraft cutting table
• PC-026 Mechanical torch height control
• PC-010 Flame torch height sensing control
• PC-002-2ND Motorized torch holder (2nd torch)