Ball Valves

Title:

Ball Valves

BV615 Series

• Cleaned and degreased for oxygen service according to CGA G-4.1 and ASTM G93 Class C, respectively

• Factory tested for leakage with Nitrogen at 6000 psi

Model	Orifice (mm)	CV	Connection Type		Diameter (mm)		Panel Mounting Hole Diameter (mm)
			Inlet	Outlet	A	B
SS-BV615-TF6M	4.8	1.6	6mm GENLOK		105	52.6	23.2
SS-BV615-TF8M	4.8	1.5	8mm GENLOK		105	52.6	23.2
SS-BV615-TF10M	4.8	1.3	10mm GENLOK		112	56.0	23.2
SS-BV615-TF12M	4.8	1.0	12mm GENLOK		117	58.5	23.2

Model	Orifice (in.)	CV	Connection Type		Diameter (mm)		Panel Mounting Hole Diameter (mm)
			Inlet	Outlet	A	B
SS-BV615-FNT2	0.187	1.2	1/8" Female NPT		2.94	1.47	0.91
SS-BV615-FNT4	0.187	1.0	1/4" Female NPT		2.93	1.47	0.91
SS-BV615-TF4	0.187	1.6	1/4" GENLOK		4.14	2.07	0.91
SS-BV615-TF6	0.187	1.4	3/8" GENLOK		4.39	2.19	0.91
SS-BV615-TF8	0.187	1.0	1/2" GENLOK		4.60	2.30	0.91

* Specifications listed in table above change. Please refer to the chart above for the available specifications for the desired connection type.

• Maximum operating pressure: 1000 psi (69 bar)

• Operating temperature: -40˚F-248˚F (-40˚C-120˚C)

• End connections: GENLOK and NPT

• Handle: Nylon

• O-ring: Fluororubber

• Spacer: Enhanced PTFE

• Mounting Nut: 316 SS

• Upper Valve Stem: 316 SS

• End Screw Seal Ring: Enhanced PTFE

• O-ring: Fluororubber

• Stop Collar: Enhanced PTFE

• Bottom Valve Stem: 316 SS

• Valve Base: PCTFE

• Resilient Pad: 60Si2Mn

• Stop Collar: Enhanced PTFE

• Valve Base Shelf: 316 SS

• End Threaded Fitting: 316 SS

SHARE